DC
Power Supplies with digital meters
UPTIN 356. DC Regulated Power Supply with two
digital meters to monitor
voltage
and current. Over load and short circuit protected (UPTIN)
Input: 230V AC, 50 Hz
Output: 0-30 V DC, 0-2
Amps
UPTIN 357. ----------------Do-----------------(0-5
Amps)
UPTIN 358. ----------------Do-----------------(0-10
Amps)
UPTIN 359. DC Regulated Power Supply with two
digital meters to monitor
voltage
and current. Over load and short circuit protected
(UPTIN) Input: 230V AC, 50 Hz Output: 0-300 V DC,
0-100 mA
UPTIN 360. ----------------Do-----------------(0-300
mA)
UPTIN 361. ----------------Do-----------------(0-500
mA)
Fixed Output DC Power Supplies (without meters)
UPTIN 362. Input: 230 V AC, 50 Hz Output: 5V
DC ±10% at 1 Amp (UPTIN)
UPTIN 363. ---------------------Do--------------------
5 V at 2 Amp (UPTIN)
UPTIN 364. ---------------------Do--------------------
9V at 1 Amp (UPTIN)
UPTIN 365. ---------------------Do--------------------
9 V at 2 Amp (UPTIN)
UPTIN 366. ---------------------Do--------------------
12 V at 1 Amp (UPTIN)
UPTIN 367. ---------------------Do--------------------
12 V at 2 Amp (UPTIN)
UPTIN 368. ---------------------Do--------------------
15 V at 1 Amp (UPTIN)
UPTIN 369. ---------------------Do--------------------
15 V at 2 Amp (UPTIN)
Note: Meters optional at extra cost
DC Power Supplies for valve experiments
UPTIN 370. DC Regulated Power Supply with two
meters to monitor voltage and current. Over
load and short circuit protected (UPTIN)
Input: 230V AC, 50 Hz
Output: 0-200 V DC at
25 mA continuously variable, 6.3 V AC at 2.5 Amp For filament
(can be used for Diode Valve Experiment)
UPTIN 371. ---------------------------Do-------------------------------(Deluxe
Model)
UPTIN 372. Same as above but with three meters
(third meter for filament current) (UPTIN)
UPTIN 373. ---------------------------Do-------------------------------(Deluxe
Model)
UPTIN 374. DC Regulated Power Supply with three
meters to monitor HT voltage, bias voltage and
current. Over load and short circuit protected (UPTIN)
Input: 230V AC, 50
Hz
Output: 0-300 V DC
at 100 mA continuously variable,
30-0-30 V (grid bias)
6.3 V AC at 2.5 Amp
for filament
(can be used for Triode
Valve Experiment)
UPTIN 375. ---------------------------Do-------------------------------(Deluxe
Model)
UPTIN 376. Same as above but with 100-0-100
grid bias
UPTIN 377. ---------------------------Do-------------------------------(Deluxe
Model)
UPTIN 378. DC Regulated Power Supply with three
meters to monitor voltage and current. Over
load and short circuit protected (UPTIN)
Input: 230V AC, 50
Hz
Output: 0-300 V DC
at 100 mA,
0-150 V DC at 30 mA
-25 to 25 V DC at 10
mA
12.5 V AC in steps
(can be used for Pentode
& Tetrode Valve Experiment)
